 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PM800 SERIES Single and dual output * * * * * * Linear topology for low noise applications Tight line and load regulation Short circuit protection Pi input filter Six sided continuous shield No derating [ 2 YEAR WARRANTY ] The PM800 Series is a comprehensive line of four single output and five dual output DC/DC converters with output power from 10 to 12 Watts. These high performance modules offer excellent regulation with low ripple and noise, and are especially useful in applications where higher output power levels are needed in a compact module. A Pi input filter in all models minimizes reflected ripple current while also providing for input spike attenuation. Six sided continuous shielding, also standard, gives EMI/RFI suppression. All models feature output current limiting, short circuit protection and input/output isolation to 500VDC. Other specifications include: line regulation of 0.02%; load regulation of 0.05% for single output models and 0.02% for dual output models; and an output voltage accuracy of 3.0%. SPECIFICATION OUTPUT SPECIFICATIONS Voltage accuracy Line regulation Load regulation Cross regulation Ripple and noise 20MHz BW All specifications are typical at nominal input, full load at 25C unless otherwise stated GENERAL SPECIFICATIONS 3.0% Efficiency Isolation voltage Switching frequency Case material UL94V-0 Single output Dual output 65% typical 500VDC, min. 20kHz, min. Non-conductive black plastic To negative output To output common 227g (8oz) Single output Dual output 330,000 hours 233,000 hours Line 8.0% NL to FL, single outputs NL to NL, dual outputs Balance - duals (max.) Single output Dual output 0.02% 0.05% 0.02% 0.5% 0.7mV rms typical, 50mV pk-pk max. 0.7mV rms typical, 35 mV pk-pk, max. 300mV 400mV 50mV 50mV typ., typ., typ., typ., 0.1s 0.1s 0.1s 0.1s Shielding connection Weight MTBF Transient response Singles, NL to FL Duals, FL to NL Singles, NL to FL Duals, FL to NL ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient -25C to +71C Case +90C, max. Non-operating amb. -40C to +125C Derating None required Cooling Free-air convection cooled Non-condensing 20% to 95% RH Temperature coefficient Single output Dual output Short circuit protection Auto-restart, max. 8 hours 0.02%/C, max. 0.01%/C, max. 130C thermal protection INPUT SPECIFICATIONS Input voltage range Input filter See Note 3 See table on facing page Pi network Relative humidity PAGE 1 SPECIAL APPLICATION MODELS | 10-12W DC/DC 10 to 12 Watt Nominal input DC/DC converters INPUT VOLTAGE 5VDC 5VDC 12VDC 12VDC 24VDC 24VDC 24VDC 48VDC 48VDC OUTPUT VOLTAGE 5VDC 12VDC 12VDC 15VDC 5VDC 12VDC 15VDC 5VDC 12VDC OUTPUT CURRENT 2000mA 940mA 525mA 412mA 2000mA 525mA 412mA 2000mA 525mA INPUT CURRENT NO LOAD 250mA 278mA 115mA 110mA 50mA 55mA 55mA 26mA 27mA FULL LOAD 3080mA 3470mA 1620mA 1590mA 640mA 780mA 770mA 320mA 390mA REFLECTED RIPPLE CURRENT (1) 108mA 122mA 55mA 54mA 32mA 39mA 38mA 32mA 39mA REGULATION LINE 0.02% 0.02% 0.02% 0.02% 0.02% 0.02% 0.02% 0.02% 0.02% LOAD (2) 0.05% 0.05% 0.02% 0.02% 0.05% 0.02% 0.02% 0.05% 0.02% MODEL NUMBER PM801 PM803 PM861 PM862 PM821 PM871 PM872 PM841 PM891 Notes 1 2 3 Figures are peak-to-peak, max. Load regulation measured from no load to full load. Fixed frequency design provides for easier input filtering and better noise performance. INPUT VOLTAGE 5V 12V 24V 48V 60% FL 4.4 to 6.5V 10.56 to 15.6V 21.12 to 31.2V 42.24 to 62.4V 80% FL 4.5 to 6.0V 10.8 to 14.4V 21.6 to 28.8V 43.2 to 57.6V 100% FL 4.65 to 5.5V 11.16 to 13.2V 22.32 to 26.4V 44.64 to 52.8V SINGLE OUTPUT MODELS 2.50 (63.5) 0.50 (12.7) 0.50 (12.7) 0.60 (15.2) 0.15 (3.8) 0.60 (15.2) 0.040(1.0) DIA. PINS CASE B1 0.88 (22.4) DUAL OUTPUT MODELS 2.50 (63.5) 0.50 (12.7) 0.50 (12.7) 0.60 (15.2) 0.15 (3.8) 0.60 (15.2) + OUT NC - OUT 1.60 (40.6) 3.50 (88.9) + OUT COM - OUT 1.60 (40.6) 3.50 (88.9) INSERTS 4-40 THREAD 0.125 (3.2) DEEP 1.60 (40.6) INSERTS 4-40 THREAD 0.125 (3.2) DEEP 1.60 (40.6) + IN 2.20 (55.9) - IN 0.22 (MIN.) (5.6) + IN 2.20 (55.9) - IN ALL DIMENSIONS IN INCHES (mm) DS_PM800_19980401.PDF Data Sheet (c) Artesyn Technologies(R) 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. http://www.artesyn.com PAGE 2 |
Price & Availability of PM800
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |